Double-bend Double-leveler
A tension leveler with two bending units and two leveling stages, engineered for strip that requires a higher level of flatness control. It is specified for lines where stronger bending and finer tension adjustment are needed to remove waves, coil set and residual stress.
Stronger bending with two leveling stages.
The Double-bend Double-leveler combines controlled strip tension with two bending units and a second set of leveling rolls. The additional bending stage provides greater capacity to work the strip, enabling the removal of waves and coil set on material that a single-leveler arrangement cannot fully flatten. This configuration is specified where flatness-control demand is high.
It processes stainless steel, silicon steel and carbon steel strip across a typical width of 350–1780 mm at 500–800 m/min. The two bending units, together with finer tension adjustment, allow the leveling work to be matched to the grade and gauge, holding a stable strip shape into the downstream line.
It is suited to stainless and silicon-steel producers, carbon-steel strip manufacturers and service centers that feed cleaning, inspection, slitting or finishing lines and require consistent flatness and low residual stress.
J— Jay, General Manager, JINYE
Reference parameters
Published reference fields for this configuration. Final leveler parameters are confirmed from your strip data during engineering review.
Roll diameter, leveling cassette, tension range, line-integration details and automation scope are confirmed during engineering review.
From your strip data to a confirmed configuration
Process and material review
We confirm material grade, thickness range, strip width, incoming flatness, line speed and process route.
Configuration match
We define the bending units, leveling rolls, tension range and line integration to suit your strip and downstream process.
Manufacture, install and commission
We manufacture the leveler, install it on site, commission it and provide ongoing technical support.
Double-bend Double-leveler
Send your strip data and flatness target. We respond within one business day with a proposed configuration and the points confirmed at engineering review.
- Material grade, width, thickness range and coil weight
- Incoming flatness, target shape and line speed
- Reply within one business day