Double-bend Single-leveler
A tension leveler that combines controlled tension, a double-bend bridle and a single leveling section to improve flatness and reduce coil set. It is engineered for finishing lines that require flatter strip ahead of slitting, inspection or coating.
Flatness improvement for finishing lines.
The Double-bend Single-leveler is JINYE's entry tension leveler for flatness work. It holds the strip under controlled tension, passes it through a double-bend bridle, then through a single leveling section. This sequence works the strip sufficiently to remove waves and relieve coil set.
The configuration is specified where a finishing line requires flatter strip but does not demand the heavier flatness control of a double-leveler. It processes stainless steel, silicon steel and carbon steel strip across a typical width of 350–1780 mm at 500–800 m/min.
It is suited to plants operating cleaning, inspection, slitting or coating lines where coil set and minor waves create downstream problems. Where the flatness target is tighter, the Double-bend Double-leveler or the 23-roll leveler is the appropriate alternative.
J— Jay, General Manager, JINYE
Reference parameters
Published reference fields for this configuration. Final leveler parameters are confirmed from your strip data during engineering review.
Roll diameter, leveling cassette, tension range, line-integration details and automation scope are confirmed during engineering review.
From your strip data to a confirmed configuration
Process and material review
JINYE confirms material grade, strip width, thickness range, coil weight, line speed and the position of the leveler within your process route.
Configuration match
We set the tension range, double-bend bridle and leveling rolls to meet your flatness target and downstream line requirements.
Manufacture, install and commission
JINYE manufactures the leveler, installs it on site, commissions it and provides ongoing technical support.
Double-bend Single-leveler
Send your strip data and flatness target. JINYE replies within one business day with a proposed configuration and the points confirmed at engineering review.
- Material grade, width, thickness range and coil weight
- Flatness target, line speed and process route
- Reply within one business day