Strip Cleaning Line
Flat strip, sheet and coil cleaning systems that remove rolling oil, emulsion, fines and surface residue prior to rolling, annealing, tension leveling, coating or finishing. Typical modules comprise alkaline or neutral degreasing, spray and brush cleaning, cascade rinsing, squeeze rolls, hot-air drying and filtration.
Surface preparation before the next process.
A strip cleaning line removes rolling oil, emulsion, metal fines and surface residue so the strip is conditioned for the subsequent process step. JINYE engineers these lines for stainless, silicon and carbon steel strip, for copper and copper-alloy strip, and for stainless, aluminum and carbon steel sheet. Width ranges from 350 to 1780 mm and thickness from 0.03 to 6.0 mm, according to the configuration.
The modules follow a consistent process logic across the range: alkaline or neutral degreasing, brush and spray cleaning, cascade rinsing, squeeze rolls, hot-air drying, and a filtration and water-treatment interface. The module count, chemistry and tension are matched to the strip, since a thin 201 stainless strip rolled down to 0.03 mm requires gentler handling than a 6 mm plate.
Clean strip protects the downstream line. Residual oil before annealing produces staining and uneven results, and the same residue before coating compromises adhesion. Correct cleaning is what keeps those later steps stable. On energy, JINYE cleaning lines can reduce energy use by up to 30% versus conventional configurations, depending on the heating, drying and circulation design.
J— Jay, General Manager, JINYE
Four cleaning lines
Select by material and gauge. Each line draws on the modules above, sized to the strip and the downstream process.
Strip Degreasing Cleaning Line
350–1780 mm · 0.03–3.0 mm · 80–300 m/min. Stainless, silicon and carbon steel strip.
View →High-speed Precision Strip Cleaning Line
450–1450 mm · 0.05–1.5 mm · 150–500 m/min. Stainless, silicon and precision cold-rolled strip.
View →Copper and Copper-alloy Degreasing Line
350–1250 mm · 0.05–2.5 mm · 60–250 m/min. Copper, copper-alloy and non-ferrous strip.
View →Sheet and Plate Cleaning Machine
600–1600 mm · 0.3–6.0 mm · 5–30 m/min. Stainless, aluminum and carbon steel sheet.
View →How JINYE builds a cleaning line
Process & material review
JINYE confirms the material, strip width, thickness range, line speed, incoming residue and the downstream process the strip feeds.
Module & chemistry match
The degreasing, brushing, rinsing, squeeze and drying modules, the chemistry route and the filtration are specified to suit the strip and the cleanliness target.
Build, install & commission
JINYE manufactures the line, installs it on site, commissions it and provides ongoing technical support.
Oil type, cleanliness target, strip tension, plant utilities and the final rolling force on any integrated rolling stand are confirmed during engineering review.
Strip Cleaning Line
Send your strip data and the process the cleaning line feeds. JINYE replies within one business day with a configuration and the points confirmed at engineering review.
- Material grade, width, thickness range & coil weight
- Line speed, incoming residue & cleanliness target
- Reply within one business day