Copper and Copper-alloy Degreasing Line
A degreasing line engineered for soft copper and copper-alloy strip. It removes rolling oil and surface residue under controlled conditions, keeping the strip clean and the surface free of marking before the next process step.
Controlled degreasing for soft, mark-sensitive surfaces.
This configuration is JINYE's cleaning line for copper, copper-alloy and other non-ferrous strip. Copper surfaces are soft and mark readily, so the line is engineered around gentle material handling. The process combines degreasing, soft-brush cleaning, rinsing, squeeze rolls and hot-air drying, with chemical-circulation filtration maintaining stable process conditions.
The line processes strip from 350 to 1250 mm wide and 0.05 to 2.5 mm thick at 60 to 250 m/min. Final settings are determined by the material and the required degree of cleanliness, and are confirmed from the customer's strip data.
It is suited to copper and copper-alloy strip producers and non-ferrous metal service centers that require complete oil and residue removal without scratching or dulling the surface.
J— Jay, General Manager, JINYE
Reference parameters
Published reference fields for this configuration. Final line parameters are confirmed from the customer's strip data during engineering review.
Oil type, cleanliness target, strip tension, plant utilities and automation scope are confirmed during engineering review.
From your strip data to a confirmed configuration
Process & material review
We confirm the material, strip width, thickness range, line speed, oil type and the required degree of cleanliness.
Configuration match
We specify the degreasing, brushing, rinsing, drying and filtration modules to suit soft copper surfaces and the downstream line.
Build, install & commission
We manufacture the line, install it on site, commission it and provide ongoing technical support.
Copper and copper-alloy degreasing line
Send your strip data and cleanliness target. We respond within one business day with a proposed configuration and the points to be confirmed at engineering review.
- Material, strip width & thickness range
- Oil type, cleanliness target & line speed
- Reply within one business day