Strip Degreasing Cleaning Line
A strip degreasing cleaning line engineered to remove rolling oil, emulsion, fines and residue before annealing or finishing. The line is configured for stainless, silicon and carbon steel strip producers that require clean, dry strip entering the next process stage.
Surface preparation for clean, dry strip ahead of the next process.
This configuration is JINYE's strip degreasing cleaning line. It removes rolling oil, emulsion, fines and surface residue from the strip prior to annealing or finishing. The strip passes through entry tension, alkaline or neutral degreasing, brushing, spray rinsing, squeeze rolls and hot-air drying, supported by filtration and a water-treatment interface behind the line.
The line processes stainless steel, silicon steel and carbon steel strip across a typical width of 350–1780 mm and a thickness range of 0.03–3.0 mm, at a reference speed of 80–300 m/min. The objective is consistent surface cleanliness, so the downstream anneal or finish proceeds from properly prepared stock.
The configuration is specified for stainless and silicon steel producers, carbon steel strip manufacturers and metal service centers that require reliable degreasing ahead of annealing, tension leveling, coating or finishing.
J— Jay, General Manager, JINYE
Reference parameters
Published reference fields for this configuration. Final line parameters are confirmed from your strip data during engineering review.
Oil type, cleanliness target, strip tension, plant utilities and automation scope are confirmed during engineering review.
From your strip data to a confirmed configuration
Process & material review
We confirm material grade, strip width, thickness range, line speed, incoming oil and residue, and the cleanliness target required before the next process.
Configuration match
We define the degreasing chemistry, brushing, rinsing, drying and filtration scope to suit your strip and the downstream anneal or finish.
Build, install & commission
We manufacture the line, install it on site, commission it and provide ongoing technical support.
Strip degreasing cleaning line
Send your strip data and process route. We respond within one business day with a proposed configuration and the parameters we confirm at engineering review.
- Material grade, width, thickness range & coil weight
- Line speed, incoming oil type & cleanliness target
- Reply within one business day